1, remove the solenoid valve from the pipeline when not in the internal parts should try and use compressed air to blow the net store.
2, the solenoid valve when not in a long time, you should close the valve before the manual valve, re-enabled, the steam condensate removal solenoid valve should be clean, and make several test action

, To be put into use before the switch properly.
3, should be regularly cleaned inside and outside and a large valve armature pull side of the dirt. Be careful not to damage the sealing surface.
4, the solenoid valve is installed, shall pass into the test medium action several times to confirm the normal be put into official use.
5, it is recommended the use of units assigned responsibility for use and maintenance.
6, the use of a long time, such as the seal between the piston and the valve seat is bad, the piston sealing surface re-grind, grind again and seat.
7, work, pay attention to the valve before and after the pressure gauge, requires working pressure must not exceed the rated pressure, working pressure must be rated pressure range. When the working

Pressure exceeds the rated pressure or working pressure exceeds the rated pressure, the solenoid valve to stop use, turn off after manual valves, solenoid valves to prevent explosions and leaks.